Vennligst vent...

I webshoppen finnes komponenter som kan være en del av en større konfigurasjon. Dersom du er usikker på om du har riktige komponenter, kontakt din Datametrix selger eller før du bestiller utstyret.
Vi tar forbehold om at kunden har foretatt en kvalitetssjekk av sine produktbestillinger.
For ordre under minimumsgrensen
NOK 1 000,- påløper det et administrasjonsgebyr på NOK 500,-
Vi jobber stadig med å forbedre DaxShop, utvide vårt sortement og yte enda bedre service til våre kunder. Har du spørsmål til våre produkter, eller det er kategorier du savner, ta kontakt med din selger.


Du må logge inn for å handle/se priser.

C819 M2M Hardened 3.7G HSPA+

CISCO C819 M2M Hardened 3.7G HSPA+ (C819HGW+7-N-K9)

SKU: C819HGW+7-N-K9
Hastighet: 300Mbps
Type: Ruter
Ikke på lagerIkke på lager


C819 Secure Hardened M2M GW (non-US) 3.7G HSPA + Release 7 with SMS/GPS and Dual WiFi Radio with ANZ

Cisco 819 Integrated Services Routers with 3G and Wi-Fi

The Cisco® 819 Integrated Services Router Family, designed in compact hardened and non-hardened form factors, is the smallest Cisco IOS® Software router with support for integrated third-generation (3G) wireless WAN (mobile broadband backhaul) and WLAN capabilities. The Cisco 819 ISR gateway provides a rapidly deployable, highly available, reliable, and secure solution designed specifically for machine-to-machine (M2M) applications. Markets that benefit from these applications include industrial automation, transportation, financial, health care, utility, and retail. Fully integrated with Cisco IOS Software, the Cisco 819 family delivers, enterprise-class features, including highly secure data, voice, and video communications to stationary and mobile network nodes across wired and wireless links. Figure 1 shows a Cisco 819 Integrated Services Router.

The Cisco 819 ISR is available in both non-hardened (Cisco 819G) and hardened (Cisco 819HG) versions. Both models include support for 3G up to 3.7G wireless WAN (WWAN) speeds. Support for 3G offers cost-effective, rapidly deployable, reliable, and secure primary or backup connectivity. With support for industrial-grade components, the hardened Cisco 819HG extends the footprint and provides deployment flexibility. The Cisco 819HG is an ideal solution for stationary and mobile environments where space, heat dissipation, exposure to extreme temperatures, harsher environments, and low power consumption are critical factors.

For mobile applications, Cisco Mobile IP delivers transparent roaming across multiple wireless networks capable of covering wide geographic areas. Additionally, the Cisco 819 ISR supports enterprise class built-in Wireless LAN (WLAN) capability. The Cisco 819HGW platforms concurrently support both 3G for wireless WAN backhaul and Cisco dual radio WLAN on the same platform as shown in Figure 2. The 802.11a/b/g/n 2X3 MIMO built-in Cisco 3500 Access Point (AP) in the Cisco 819, comes with Cisco’s CleanAir technology, to create a self-healing, self-optimizing WLAN. Moreover, with the advantage of dual radio, the integrated AP can serve both as an access point and as a client to a wireless mesh network. This provides another source for WAN diversity along with Gigabit Ethernet, serial, and cellular. The AP ClientLink feature improves reliability and coverage for legacy devices and dynamic frequency selection (DFS allows detecting and avoiding interference with radar signals to comply with regulatory domains. Figure 2 shows the 819 ISR with integrated 3G and 802.11 a/b/g/n AP.

A critical component of the Cisco M2M architecture, the Cisco 819 ISR serves as the single, horizontal platform which enhances the Cisco implementation of “any device, anywhere, any place” across multiple industries, including banking, retail, healthcare, manufacturing, government. It also provides the ability to extend Cisco product-based networks to small branch offices with a relatively low incremental investment, as well as to enable managed services offerings based on Cisco architecture..

The Cisco 819 ISRs for M2M applications supports 3G High-Speed Packet Access Plus [HSPA+] and Evolution Data Optimized [EV-DO Rev A]), enabling up to 3.7G speeds. They are backward compatible with High-Speed Packet Access (HSPA), Universal Mobile Telecommunications Service (UMTS). Enhanced Data Rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EV-DO Rev 0/1xRTT. The Cisco 819 3G includes an integrated WLAN access point and has two hardened and un-hardened variants:

  • Global System for Mobile Communications (GSM) and UMTS models are based on the Third-Generation Partnership Project (3GPP), and they support HSPA+ (High-Speed Uplink Packet Access [HSUPA] and High-Speed Downlink Packet Access [HSDPA]), UMTS, EDGE, and GPRS.
  • Code Division Multiple Access (CDMA) models are based on 3GPP2, and they support EV-DO Rev A and Rev 0 and 1xRTT.

The Cisco 819 ISR family includes a broad range of enterprise-class features including:

  • Security services, including firewall, intrusion prevention, VPN and Cisco ISR Web Security with ScanSafe which require no additional hardware or client software, This enables branch offices, manufacturing sites, hospitals, banks, and mobile fleets, for example to intelligently redirect web traffic to the cloud to enforce granular security and acceptable use policies over user web traffic. With this solution, you can deploy market-leading web security quickly and easily to protect branch office users from web-based threats, such as viruses, while saving bandwidth, money, and resources.
  • Additional WAN options such as Serial and Gigabit Ethernet WAN interfaces and a 4-port 10/100 Fast Ethernet Managed switch for LAN connectivity. The Cisco 819 provides quality-of-service (QoS) features for optimizing voice and video applications.
  • Cisco Configuration Professional is a web-based configuration tool that simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at remotesites.
  • With enhanced data rates and improved latency (below 100 milliseconds), WWAN services are an ideal way to supplement traditional wire line services. Third- and fourth-generation WWAN data services offered today have average data rates well in excess of ISDN speeds, with theoretical limits in excess of 21 Mbps on the downlink and 5.76 Mbps on the uplink. The 3G and 4G LTE WWAN can be used as a primary link for sites with lower bandwidth requirements and for mobile applications. The 3G and 4G LTE WWAN data services can also be used as a cost-effective alternative in areas where broadband services are either not available or very expensive. Cisco is building on these performance milestones and adding support for wireless to our wide variety of WAN interface alternatives.


3G Specifications



3G modem form factor

Embedded (included with the router)

Important 3G features

Auto-switch failover between primary and backup link
Multichannel-interface-processor (MIP) profile configuration
CDMA Data Retry
3G SNMPv2 MIBs and traps
Remotely initiated data callback using voice
Remotely initiated data callback using Short Message Service (SMS)
Remote firmware upgrade over 3G
Virtual diagnostic monitoring
Mobile Equipment Personalization (MEP) lock and unlock capabilities
SIM lock and unlock capabilities

Dual SIM support

High reliability and cellular multi-homing support for HSPA and HSPA+ based networks
Dual SIM card socket; compliant with ISO-7816-2 (SIM mechanical)
Two Internal SIM Card Slots:
C819(H)G-U-K9, C819(H)G+7-K9, C819HGW+-A-A-K9, C819HGW+7-E-K9,C819HGW+7-N-K9
No SIM Card Slot:
C819(H)G-V-K9, C819(H)G-S-K9, C819(H)G-B-K9, C819HGW-V-A-K9, C819HGW-S-A-K9

SMS and Global Positioning System (GPS)

Ability to send and receive SMS (maximum of 160 characters)
Standalone GPS


3G WWAN MIB persistence

3G network management and diagnostics

In-band and out-of-band management using Telnet (Cisco IOS Software command-line interface [CLI]) and SNMP, including MIB II and other extensions
Industry-standard 3G diagnostics and monitoring tools (QUALCOMM CDMA Air Interface Tester [CAIT] and Spirent Universal Diagnostic Monitor [UDM])

Modem information

Modem form factor: Embedded Peripheral Component Interconnect (PCI) minicard

819(H)G-U: Sierra Wireless MC8795V (non-U.S. market) support HSPA Release 6
819(H)G(W)+7: Sierra Wireless MC8705 supporting HSPA+ Release 7
819(H)G(W)-S: Sierra Wireless MC5728V
819(H)G(W)-V: Sierra Wireless MC5728V
819(H)G-B: Sierra Wireless MC5728V

Programming interfaces

Cisco IOS Software CLI

Wireless technologies supported (performance and throughput)

Part Number: C819(H)G-U-K9
HSPA: 850, 900, 1900, and 2100 MHz (forward link up to 7.2 Mbps; reverse link up to 5.76 Mbps)
Backward compatibility:
HSDPA: 850, 900, 1900, and 2100 MHz (forward link up to 7.2 Mbps; reverse link up to 384 kbps)
UMTS: 850, 900, 1900, and 2100 MHz (forward link up to 2.0 Mbps; reverse link up to 384 kbps)
EDGE: 850, 900, 1800, and 1900 MHz (forward link up to 236 kbps; reverse link up to 124 kbps)
GPRS: 850, 900, 1800, and 1900 MHz (forward link up to 80 kbps; reverse link up to 42 kbps)
Part Number: C819(H)G+7-K9
and C819HGW+7-E-K9
and C819HGW+7-A-A-K9
and C819HGW+7-A-N-K9
HSPA+: 850, 900, 1900, and 2100 MHz (forward link up to 21Mbps; reverse link up to 5.76 Mbps)
Backward compatibility:
HSDPA: 850, 900, 1900, and 2100 MHz (forward link up to 21 Mbps; reverse link up to 384 kbps)
UMTS: 850, 900, 1900, and 2100 MHz (forward link up to 2.0 Mbps; reverse link up to 384 kbps)
EDGE: 850, 900, 1800, and 1900 MHz (forward link up to 236 kbps; reverse link up to 124 kbps)
GPRS: 850, 900, 1800, and 1900 MHz
WiFi Domain: Please see the 3500 AP Data Sheet:
Part Number: C819(H)G-S-K9
and C819(H)G-V-K9
and C819(H)G-B-K9
and C819HGW-S-A-K9
and C819HGW-V-A-K9
CDMA 1xEV-DO Rev A (forward link up to 3.1 Mbps; reverse link up to 1.8 Mbps)
Backward compatibility:
CDMA 1xEV-DO Rev 0 (forward link up to 2.4 Mbps; reverse link up to 153.6 kbps)
CDMA 1xRTT (forward link up to 153.6 kbps; reverse link up to 153.6 kbps)
x: S = Sprint networks; V = Verizon wireless networks; B = Bharat Sanchar Nigam Limited (BSNL) networks

Wireless technologies supported (performance and throughput)

Part Number: C819HWD-E-K9
Part Number: C819HWD-A-K9
Part Number: C819H-K9

Frequency bands supported

Part Number: C819(H)G-U-K9

850, 900, 1900, and 2100MHz WCDMA bands (HSUPA, HSDPA, and UMTS)
850, 900, 1800, and 1900 MHz GSM bands (EDGE and GPRS)

Part Number: C819(H)G+7-K9

and C819HGW+7-E-K9

and C819HGW+7-A-A-K9

and C819HGW+7-A-N-K9

850, 900, 1900, and 2100MHz WCDMA bands (HSUPA, HSDPA, and UMTS)
850, 900, 1800, and 1900 MHz GSM bands (EDGE and GPRS)

Part Number: C819(H)G-x-K9

and C819(H)G-V-K9

and C819(H)G-B-K9

and C819HGW-S-A-K9

and C819HGW-V-A-K9

800 MHz: North American cellular band
1900 MHz: North American PCS band
x: S = Sprint networks; V = Verizon wireless networks; B = BSNL networks

Included antenna

Cellular Access: Two multiband swivel-mount dipole antennae (3G-ANTM1919D) are included for all 819 SKUs that have 3G Cellular functionality

WLAN: Three Cisco Multiband Swivel-Mount Dipole Antennae. ( AIR-ANTM2050D-R) are included for all 819 SKUs that have WLAN functionality.

LED indicators for 3G

Received signal strength indication (RSSI) (green)
WWAN (green)
SIM status (green/yellow )
3G service (green)
GPS (green/yellow)

For detailed LED Description including for WLAN please see the 819 Deployment Guide.

Carrier support

Cisco IOS Software Features on Cisco 819: Advanced IP Features Set (Default)



Cisco IOS Software requirement

Cisco IOS Software Release 15.2(4)M1 or later for 819H, 819HW and 819HGW SKUs.

Cisco IOS Software Release 15.1(4)M1 or later for 819(H)G SKUs

IP and IP services features

Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
Generic routing encapsulation (GRE) and multipoint GRE (MGRE)
Cisco Express Forwarding
Standard 802.1d Spanning Tree Protocol
Layer 2 Tunneling Protocol (L2TP)
Layer 2 Tunneling Protocol Version 3 (L2TPv3)
Network Address Translation
Dynamic Host Configuration Protocol (DHCP) server, relay, and client
Dynamic Domain Name System (DNS)
DNS Proxy
DNS Spoofing
Access control lists (ACLs)
IPv4 and IPv6 Multicast
Open Shortest Path First (OSPF)
Border Gateway Protocol (BGP)
Performance Routing (PfR)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Virtual Route Forwarding (VRF) Lite
Next Hop Resolution Protocol (NHRP)
Bidirectional Forwarding Detection (BFD)
Web Cache Communication Protocol (WCCP)

Switch features

Auto Media Device In/Media Device Cross Over (MDI-MDX)
8 802.1Q VLANs
MAC filtering
Switched Port Analyzer (SPAN)
Storm control
Smart ports
Secure MAC address
Internet Group Management Protocol Version 3 (IGMPv3) snooping

Security features

Secure connectivity:

Secure Sockets Layer (SSL) VPN for secure remote access
Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
Public-key-infrastructure (PKI) support
20 IPsec tunnels
Cisco Easy VPN Client and Server
NAT transparency
Dynamic Multipoint VPN (DMVPN)
Tunnel-less Group Encrypted Transport VPN
IPsec stateful failover
VRF-aware IPsec
IPsec over IPv6
Adaptive control technology
Session Initiation Protocol (SIP) application layer gateway

Cisco IOS Firewall:

Zone-Based Policy Firewall
VRF-aware stateful inspection routing firewall
Stateful inspection transparent firewall
Advanced application inspection and control
Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
Dynamic and static port security
Firewall stateful failover
VRF-aware firewall

Content filtering:

Subscription-based content filtering with Trend Micro
Support for Websense and SmartFilter
Cisco IOS Software black and white lists

Integrated threat control:

Intrusion prevention system (IPS)
Control Plane Policing
Flexible Packet Matching
Network foundation protection


Web security and web filtering solution that requires no additional hardware or client software .
Cisco ScanSafe enables branch offices to intelligently redirect web traffic to the cloud to enforce granular security and acceptable use policies over user web traffic. With this solution, you can deploy market-leading web security quickly and easily to protect branch office users from web-based threats, such as viruses, while saving bandwidth, money, and resources.

QoS features

Low Latency Queuing (LLQ)
Weighted Fair Queuing (WFQ)
Class-Based WFQ (CBWFQ)
Class-Based Traffic Shaping (CBTS)
Class-Based Traffic Policing (CBTP)
Policy-Based Routing (PBR)
Class-Based QoS MIB
Class of service (CoS)-to-differentiated services code point (DSCP) mapping
Class-Based Weighted Random Early Detection (CBWRED)
Network-Based Application Recognition (NBAR)
Link fragmentation and interleaving (LFI)
Resource Reservation Protocol (RSVP)
Real-Time Transport Protocol (RTP) header compression (cRTP)
Differentiated Services (DiffServ)
QoS preclassify and prefragmentation
Hierarchical QoS (HQoS)

Management features

Cisco Configuration Professional
Cisco Configuration Express
Cisco Configuration Engine support
Cisco AutoInstall
IP service-level agreement (IP SLA)
Cisco IOS Embedded Event Manager (EEM)
Cisco Security Manager
Telnet, SNMPv3, SSH, CLI, and HTTP management
Out-of-band management with external modem through virtual auxiliary port

High-availability features

Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
Hot Standby Router Protocol (HSRP)
Multigroup HSRP (MHSRP)
Dial backup with external modem through virtual auxiliary port
Dual SIM support for cellular multihoming

Metro Ethernet features

Ethernet operations, administration, and maintenance (OAM)
Ethernet Local Management Interface (LMI)
IP SLA for Ethernet

IPv6 features

IPv6 addressing architecture
IPv6 name resolution
IPv6 statistics
IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-PT)
Internet Control Message Protocol Version 6 (ICMPv6)

Number of recommended users


System Specifications




Default and maximum DRAM

819(H)G(with 3G only): 512 MB

819HGW, 819HWD (with WiFi) and 819H: 1GB

Default and maximum flash memory

819(H)G: 256 MB

819HGW and 819HWD (with WiFi) and 819H: 1GB

Interface Support

Console or auxiliary port

RJ-45: Single dual-purpose port, which provides direct connection to a console or external modem for management or backup access point

Mini-USB port (RSVD)

Mini-USB port to support remote 3G diagnostics and monitoring tools (QUALCOMM CAIT and Spirent UDM)*

WAN interfaces

Wireless WAN with 3G, 3.5G and 3.7G speeds
10/100/1000 Gigabit Ethernet port
Cisco Smart Serial Interface (sync/async/bisync)

WLAN Features

2x3 multiple-input multiple-output (MIMO) with two spatial streams
Maximal ratio combining (MRC)
Legacy beamforming
20- and 40-MHz channels
PHY data rates up to 300 Mbps
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Cyclic shift diversity (CSD) support

LAN interfaces

Four 10/100 Fast Ethernet ports


System OK (green/amber)
Activity (green)
WWAN (green/amber)
SIM status (green/amber)
RSSI (green)
3G service (green/amber)
GPS (green/amber)
Speed and link for Gigabit Ethernet WAN port (green)
Speed and link for all Fast Ethernet LAN ports (green)

Serial WAN interface

Support for both synchronous and asynchronous modes
Synchronous maximum speed of up to 8 Mbps
Asynchronous maximum speed of up to 115.2 kbps
Support for bisync modes
Support for network clock synchronization

Serial protocol support

EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21

Cisco Smart Serial Cabling

Cisco Smart Serial connectors and supported cables:

Product Number











Cable Type

V.35 DTE

V.35 DCE





X.21 DTE

X.21 DCE




10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

Connector Type











Physical Characteristics

Physical dimensions
(H x W x D)

Cisco 819G

1.67 x 7.7 x 7.2 in.

(42 x 196 x 183 mm)

Cisco 819HG and Cisco 819H

1.73 x 7.7 x 8.1 in.

(44 x 196 x 206 mm)

C819HGW and C819 HWD

1.73 x 7.7 x 9.0 in

(44 x 186 x 229 mm)


2.3 lb (1.0 kg)

3.2 lb (1.5 kg)

3.4lb(1.54 kg)

Mean time between failure (MTBF – Ground Benign)


MTBF Hours





C819(H)G-x-K9 where x=S, V, B


C819HGW-S-A-K9 and C819HGW-V-A-K9


C819HGW+7-E-K9, C819HGW+7-N-K9, C819HGW+7-A-A-K9


C819HWD-E-K9, C819HWD-A-K9




Maximum platform power consumption

Cisco 819G

11 watts

Cisco C819H(G)(W)

20 watts

Environmental operating range


C819 HG

C819HGW and C819HWD

32 to 104°F

(0 to 40°C)

–13 to 140°F

(–25 to 60°C)

–13 to 140°F

(–25 to 60°C)

Operating altitude

Above 5000 ft derate maximum operating temperature 1.50C per 1000 feet

Maximum altitude: 10,000 ft

Standard safety certifications

UL 60950-1, 2nd edition
CAN/CSA C22.2 No. 60950-1, 2nd edition
EN 60950-1, 2nd edition
CB to IEC 60950-1, 2nd edition with all group differences and national deviations

EMC emissions

EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1

EMC immunity

EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386

Radio Immunity

EN301 489-1, EN 301 489-7, and EN301 489-24

Cellular radio

EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, and 47 CFR Part 24



Maximum 85% non-condensing RH

C819 HG

Maximum 95% non-condensing RH

C819HGW and C819HWD

Maximum 95% non-condensing RH

Operating conditions (Cisco 819HG C819HGW and C819HWD)

IP 41 per IEC 60529 for Vertical Falling Water
Pollution 3 for Dust

Operational Vibration

MIL-STD-810G 2.2.1 Category 4; truck transportation over U.S. highways-restrained cargo
EN61373 functional random vibe - category 1, class B
SAE J1455 operating random vibe cap mounted truck
SAE J1455 Operating Sinusoidal Vibration, Category 3

Nonoperational Vibration

MIL-STD-810G 2.3.9 Category 20 - Ground vehicles
EN61373 simulated non-op long-life vibe - category 1, class B
SAE J1455 Non-operating Sinusoidal Vibration, Category 3

Operational Shock

MIL-STD-810G 2.2.2 Procedure 1, Functional Shock

Nonoperational Shock

MIL-STD-810G 2.2.2 Procedure 5, Crash Hazard
MIL-STD-810G 2.2.2 Procedure 6, Bench Handling
EN61373 non-op shock class B
SAE J1455 Handling test

Vibration and Shock

(Railway Vehicles)

EN61373 Functional Random Vibe - Category 1, Class B
EN61373 Simulated Non-op Long-life Vibe - Category 1, Class B
EN61373 Non-op Shock, Class B

Power specifications

The default configuration includes an external AC adapter that supplies up to 20 W of power. The AC power connection is a two-pin IEC 320 C8 receptacle. A mating AC power cord is supplied. The AC adapter does not provide chassis grounding to the router. A 1.3 meter long output cable connects to the router.

AC Power Adapter

Input Voltage: 85-264 VAC 100-240 VAC nominal
Maximum Power Consumption: 25W
Maximum Output Power Rating: 20 W ( 5VDC, 4 Amps)

Optional external DC power adapters are available for 12 VDC and 24 VDC nominal vehicle power.

12 VDC vehicle adapter has a 10 VDC to 36 VDC operating range
24 VDC vehicle adapter has an 18 VDC to 75 VDC operating range*

The vehicle power adapters may be used for fixed or mobile installations. They do not provide electrical isolation; the input negative is connected to the output negative (chassis ground). Input cable is 1 meter long with stripped and tinned bare wire connections. The input positive connection is a white wire and the input negative is a black wire.

Power Adapter

Nominal Input Range






(3G SKUs)






(3G+WiFi SKUs)



(WiFi SKUs)


(Serial SKU)

























Martek MBRH




Martek MBRH




Martek MBRH




Martek MBRH






Martek MBRH






Martek MBRH






Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.