Vennligst vent...

VIKTIG
I webshoppen finnes komponenter som kan være en del av en større konfigurasjon. Dersom du er usikker på om du har riktige komponenter, kontakt din Datametrix selger eller Sales@datametrix.no før du bestiller utstyret.
Vi tar forbehold om at kunden har foretatt en kvalitetssjekk av sine produktbestillinger.
 
For ordre under minimumsgrensen
NOK 1 000,- påløper det et administrasjonsgebyr på NOK 500,-
 
Vi jobber stadig med å forbedre DaxShop, utvide vårt sortement og yte enda bedre service til våre kunder. Har du spørsmål til våre produkter, eller det er kategorier du savner, ta kontakt med din selger.
 
    
 
 
 
 
 

Ikke bestillbart!

Du må logge inn for å handle/se priser.

4507-E CHASSIS TWO WS-X4648-RJ45V+E SUP6L-E

CISCO 4507-E CHASSIS TWO WS-X4648-RJ45V+E SUP6L-E (WS-C4507RES6L-96V+)


SKU: WS-C4507RES6L-96V+
Produkt: Ethernet PoE
Porter: 96
Hastighet: 1Gbps
Ikke på lagerIkke på lager
 
Beskrivelse

Cisco Catalyst 4500E Series Switch


Cisco is announcing the Cisco® Catalyst® 4500E Series, an enterprise-class borderless network access and aggregation switch, with 848 Gbps of bandwidth per system. This enterprise-class switch is the first Cisco Catalyst switch at 48 Gbps per slot, providing flexible NetFlow and advanced security, combined with reduced total cost of ownership (TCO) and excellent investment protection to facilitate a borderless user experience for enterprise, public sector, midmarket, and commercial customers deploying business-critical applications.

The latest Cisco Catalyst 4500E Series, including the new Cisco Catalyst 4500 Supervisor Engine 7-E, two new E-Series line cards, and two new E-Series chassis, is a next-generation extension to the rapidly growing 4500E Series installed base and an addition to widely deployed the Cisco Catalyst 4000 and 4500 Series of switches.

The latest Cisco Catalyst 4500E Series system is enabled by the Supervisor Engine 7-E, which enables borderless performance at 848 Gbps per system, higher scalability, and services along with reduced total cost of ownership and superior investment protection. The enterprise-class modular Cisco Catalyst 4500E Series offers the following:

• Performance/Scalability
– Nonblocking 48 Gbps/slot and total system bandwidth of 848 Gbps with the new Supervisor Engine 7-E, ready with four Gigabit Ethernet/10 Gigabit Ethernet (GbE/10GbE) uplinks
– Power over Ethernet (PoE) scalability for the next-generation workspace with nonblocking 48p 10/100/1000 PoEP line card and highly efficient 6000W power supply with real current monitoring and remote power cycle capability
– High densities of up to 384 ports of 10/100/1000, 192 ports of GbE Small Form-Factor Pluggable (SFP), or 96 ports of 10GbE SFP+
– Scalable routing (IPv4, IPv6, and multicast) tables, Layer 2 tables, and access control list (ACL) and quality of service (QoS) entries to help ensure 8 queues per port and comprehensive security policies per port
• Infrastructure services
– Cisco IOS® XE Software, the modular open application platform for virtualized borderless services with the full feature set of Cisco IOS Software Release 15.0SG
– Maximum resiliency with redundant components, Nonstop Forwarding/Stateful Switchover (NSF/SSO) and In-Service Software Upgrade (ISSU) support
– Network virtualization through multi-VRF technology for Layer 3 segmentation
– Automation through Embedded Event Manager (EEM), Cisco Smart Call Home, AutoQoS, and Auto SmartPorts for fast provisioning, diagnosis, and reporting
• Borderless services
– Optimized application performance through deep visibility with flexible NetFlow supporting rich Layer 2/3/4 information (MAC, VLAN, TCP flags) and synthetic traffic monitoring with IP service-level agreements (SLAs)
– Medianet capabilities to simplify video quality of service, monitoring, and security
– Energy-efficient design with Cisco EnergyWise technology to manage the network, PoEP endpoints, and PCs
• Investment protection and reduced TCO
– Full backward compatibility for Supervisor Engine 7-E with 6 Gbps, 24 Gbps, and 48 Gbps/slot line card support
– LAN Base, IP Base, and Enterprise Services software options for base, standard, and advanced borderless services deployments and pay-as-you-grow licensing model
– Limited lifetime warranty with free software update policy on LAN Base and IP Base
– Full set of Cisco and partner support options

Components of Premium Borderless Network Cisco Catalyst 4500E Series
• Cisco Catalyst 4500E Supervisor Engine 7-E
• Cisco Catalyst 4500E 10/100/1000 line rate PoEP line card
• Cisco Catalyst 4500E 12-port 10GbE fiber line card
• Cisco Catalyst 4500E Redundant Chassis

Cisco Catalyst 4500E Supervisor Engine 7-E

The Cisco Catalyst 4500E Supervisor Engine 7-E (Figure 1) is the first Cisco Catalyst switch supervisor engine to provide 48 Gbps bandwidth per slot and flexible NetFlow for application intelligence.

Primary Supervisor Engine 7-E features include:
• 848 Gbps switching capacity with 250 Mpps of throughput
• 4 10 Gigabit Ethernet uplinks (SFP+)
• SFP support on uplinks to offer flexibility for up to 4 Gigabit Ethernet
• 128K flexible NetFlow entries in hardware
• External USB and SD card support for flexible storage options
• Flexibility to operate at 6, 24 or 48 Gbps per line card slot with no performance degradation
• IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
• Dynamic hardware forwarding-table allocations for ease of IPv4-to-IPv6 migration

Cisco Catalyst 4500E Series Line Cards

The Cisco Catalyst 4500E Series line cards (Figure 2) include the following options:
• 48-port line rate 10/100/1000 E-Series PoEP line card
• 12-port 10 Gigabit Ethernet E-Series line card with SFP+ optics (2.5:1 oversubscribed)

The Cisco Catalyst 4500E 48-port line rate 10/100/1000 PoEP supports the following:
• PoEP (30W) on all ports simultaneously
• Security through IEEE 802.1ae Linksec encryption for confidentiality, identity mechanisms for authentication
• Jumbo frames for various applications
• Energy efficient line card with 20 percent lower power consumption compared to predecessors

The Cisco Catalyst 4500E 12-port 10 Gigabit Ethernet SFP+ (Figure 3) supports the following:
• 10GbE port density of up to 100 ports for enterprise aggregation deployments
• Security through IEEE 802.1ae Linksec encryption for confidentiality, identity
• Flexibility for GbE aggregation with SFP support
• Most power-efficient 10GbE aggregation line card with lowest power per 10GbE port

Cisco Catalyst 4500E Redundant Chassis

The Cisco Catalyst 4500E Series consists of two new redundant chassis models, 7-slot and 10-slot (Figure 4), providing 48 Gbps bandwidth per slot. These new redundant chassis supports all E-Series supervisor engines, Supervisor Engine V with 10GbE, and E-Series line cards in addition to all currently shipping classic line cards and Cisco Catalyst 4500 power supplies for investment protection. The 10-slot redundant chassis allows same speed operation on all line card slots. The Cisco Catalyst 4500E Series chassis supports classic and E-Series line cards with no effect on performance if slot speeds are mixed in the same chassis.

Ordering Information for Cisco Catalyst 4500E Series

Product ID

Description

WS-X45-SUP7-E

Cisco Catalyst 4500E Series Supervisor, 848 Gbps

WS-X4748-RJ45V+E

Cisco Catalyst 4500E 48-Port PoE 802.3at 10/100/1000 (RJ45)

WS-X4712-SFP+E

Cisco Catalyst 4500E Series 12-Port 10GbE (SFP+)

WS-C4507R+E

Cisco Catalyst 4500E 7-slot chassis for 48 Gbps/slot

WS-C4510R+E

Cisco Catalyst 4500E 10-slot chassis for 48 Gbps/slot

BN-CF2-SBA+K9

4500 Core Foundation Bundle - R+E chassis

WS-C4507RES6L+96V+

4507R+E Chassis, two WS-X4648-RJ45V+E, Sup6L-E

WS-C4510RE-S7+96V+q

4510R+E Chassis, two WS-X4748-RJ45V+E, Sup7-E

S45U-31-01XO

Universal Software image for Supervisor 7-E

S45UK9-31-01XO

Universal SSH Software image for Supervisor 7-E

L-C4500E-LB-IP=

C4500E SUP7-E LAN Base to IP Base E-License

L-C4500E-IP-ES=

C4500E SUP7-E IP Base to Enterprise Services E-License

L-C4500E-LB-ES=

C4500E SUP7-E LAN Base to Enterprise Services E-License

MEM-X45-2GB-E

Cisco Catalyst 4500 2GB SD Memory Card for Sup7-E

USB-X4GB-E

Cisco Catalyst 4500 4GB USB device for Sup7-E



Lower Operating Expenditures While Improving Network Availability with CiscoWorks LAN Management Solution

CiscoWorks LAN Management Solution (LMS) is an integrated suite of management tools that simplify the configuration, administration, monitoring, and troubleshooting of Cisco networks. Built upon popular Internet-based standards, CiscoWorks LMS enables network operators to manage the network through a browser-based interface that can be accessed any time from anywhere within the network. CiscoWorks LMS maintains a centralized list of all Cisco network devices and their credentials that serves as a single repository for all CiscoWorks applications, whether they are installed locally or distributed in a multiserver deployment. CiscoWorks LMS Portal provides functional views that can be customized to meet the needs of an individual or group of network operations staff, simplifying integration and navigation between Cisco and other third-party application functionality. CiscoWorks support is now available for the Cisco Catalyst 4500E Series platforms, simplifying the deployment, configuration, and day-to-day management of these platforms and the services they provide.

Enhance Operational Manageability with Cisco NAM 2200 Series Appliances

The Cisco NAM 2200 Series Appliance provides comprehensive operational visibility into Cisco Catalyst 4500 Series switch deployments. It combines application performance visibility, traffic analysis, and troubleshooting to enable network administrators to effectively manage delivery of converged network services. The visibility provided by NAM allows IT to deliver a consistent end-user experience and improve service levels. It also helps to optimize resources with comprehensive analysis of traffic and effective use of intelligent network services such as QoS and Cisco WAAS. In addition, Cisco NAM improves operational efficiency with proactive detection of performance issues and accelerated problem isolation and root-cause analysis.

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco Services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services.

Cisco Catalyst 4500 Series Line Cards


High Performance, Mobile, and Secure User Experience

The Cisco® Catalyst® 4500 Series Switches enable borderless networks, providing high performance, mobile, and secure user experiences through Layer 2-4 switching. Enabling security, mobility, application performance, video, and energy savings over your network infrastructure, the Cisco Catalyst 4500 supports resiliency, virtualization, and automation, further improving the ease of network use. Cisco Catalyst 4500 Series Switches provide borderless performance, scalability, and services with reduced total cost of ownership and superior investment protection.

The Cisco Catalyst 4500 delivers predictable and scalable high performance, with advanced dynamic quality of service (QoS) capabilities and configuration flexibility for deploying borderless networks. Integrated resiliency features in both hardware and software maximize network availability, helping to ensure workforce productivity, profitability, and customer success. Its centralized, innovative, and flexible system design helps ensure smooth migration to wire-speed IPv6 and 10 Gigabit Ethernet (GE). The forward and backward compatibility between generations of the Cisco Catalyst 4500 Series extends deployment life, providing exceptional investment protection, while reducing the total cost of ownership.

The Cisco Catalyst 4500E Series is a high-performance next-generation extension to the Cisco Catalyst 4500 Series. The new E-Series is composed of the Cisco Catalyst 4500E Series Supervisor engines, E-Series line cards, and E-Series chassis, which are designed for a high-performance, mobile, and secure user experience with superior backward and forward compatibility, delivering exceptional investment protection for organizations of all sizes.

Cisco Catalyst 4500E Series and Classic Line Cards

The Cisco Catalyst 4500 Series offers two classes of line cards: classic and E-Series. Classic line cards provide 6 gigabits of switching capacity per slot. E-Series line cards provide increased switching capacity per slot. This increase in per-slot switching capacity with the E-Series line cards requires the Cisco Catalyst 4500E Series chassis and the Cisco Catalyst 4500E Series Supervisor. There are two types of E-Series line cards based on the per-slot switching capacity. E-Series line cards numbered 47xx operate at 48 gigabits per slot, while E-Series line cards numbered 46xx operate at 24 gigabits per slot. Classic line cards may be deployed in both classic and E-Series chassis with either classic Cisco Catalyst 4500 Series supervisor engines or with the Cisco Catalyst 4500E Series Supervisor Engine. With the E-Series supervisor engine, the per-slot switching capacity for classic line cards remains at 6 gigabits per slot. However, because of the centralized switching architecture of the Cisco Catalyst 4500, the classic line cards will adopt all of the new E-Series supervisor engine features such as eight queues per port, dynamic QoS, and hardware-based IPv6 routing. For more feature details, refer to the E-Series supervisor engine data sheet. Classic line cards and E-Series line cards may be mixed and matched within a Cisco Catalyst 4500E Series chassis with no performance degradation: classic line cards will operate at 6 gigabits per slot, and E-Series line cards operate at either 48 gigabits per slot or 24 gigabits per slot based on whether they belong to the 47xx or 46xx family of line cards. Table 1 summarizes the chassis and supervisor support for both classic and E-Series line cards.

Cisco Catalyst 4500 Line-Card Support Options

Line-Card Type

Per-Slot Bandwidth

Chassis Support

Supervisor Support

Cisco Catalyst 4500 47xx E-Series Line Cards

48 Gbps

Cisco Catalyst 4503-E, 4506-E, 4507R+E, and 4510R+E

Supervisor Engine 7-E

WS-X4748-RJ45V+E 1

24 Gbps

Cisco Catalyst 4507R-E and 4510R-E

Supervisor Engine 7-E

Cisco Catalyst 4500 46xx E-Series Line Cards

24 Gbps

Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E 2

Supervisor Engine 7-E,

Supervisor Engine 6-E,

Supervisor Engine 6L-E

Cisco Catalyst 4500 Series Classic Line Cards

6 Gbps

Cisco Catalyst 4503, 4506, 4507R, and 4510R Switches

Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E Switches

Supervisor Engine 7-E 3,

Supervisor Engine 6-E,

Supervisor Engine 6L-E3,

Supervisor Engine V-10GE



Power over Ethernet on Cisco Catalyst 4500E

The Cisco Catalyst 4500E Series offers line cards, power supplies, and accessories required to deploy and operate standards-based Power over Ethernet/Power over Ethernet Plus (PoE/PoEP). PoE provides power over 100m of standard Category 3/5 unshielded twisted-pair (UTP) cables when an IEEE 802.3af/at-compliant or Cisco prestandard powered device is attached to the PoE/PoEP line-card port. Instead of requiring wall power, attached devices such as IP phones, wireless base stations, video cameras, and other IEEE-compliant appliances can use power provided from the Cisco Catalyst 4500 Series PoE/PoEP line cards. This capability gives network administrators centralized control over power and eliminates the need to install outlets in ceilings and other out-of-the-way places where a powered device can be installed.

Although all references to "PoE/PoEP," "inline power," and "voice" power supplies and line cards are synonymous, there are currently only three versions: Cisco prestandard, IEEE 802.3af compliant, and IEEE 802.3at compliant. Every Cisco Catalyst 4500 Series chassis and PoE power supply supports the IEEE 802.3af/at standard and the Cisco prestandard power implementation, helping ensure backward compatibility with existing devices powered by Cisco. All IEEE 802.3af/at-compliant line cards can distinguish an IEEE or Cisco prestandard powered device from an unpowered network interface card (NIC), helping ensure power is applied only when an appropriate device is connected.

Cisco Catalyst 4500E Series and Classic Gigabit Ethernet Copper Line Cards

The Cisco Catalyst 4500E Series 48-port Gigabit Ethernet line cards provide high-performance 10/100/1000 switching. There are two types of E-Series line cards based on the per-slot bandwidth: 47xx line cards that drive 48 Gbps per slot and 46xx line cards that drive 24 Gbps per slot. The Cisco Catalyst 4500 48-port 10/100/1000 E-Series 47xx line card provides standard IEEE 802.3at PoEP support on all 48 ports simultaneously. This line card also supports standard IEEE 802.1AE encryption and Cisco TrustSec™ in hardware. The Cisco Catalyst 4500 48-port 10/100/1000 E-Series 46xx line cards are available in three versions:
• Data only (no PoE)
• Standard IEEE 802.3af PoE
• Standard IEEE 802.3at PoEP

Similarly, classic Gigabit Ethernet copper line cards are also available in three versions:
• Data only (no PoE)
• Standard IEEE 802.3af PoE
• Standard IEEE 802.3at PoEP

Cisco Catalyst 4500 Classic Fast Ethernet Copper Line Cards

The Cisco Catalyst 4500 Series offers a variety of classic Fast Ethernet line cards with copper interfaces optimized for desktops and servers for enterprise and commercial switching solutions. There are two varieties of fast Ethernet copper line cards:
• Data only (no PoE)
• Standard IEEE 802.3af PoE

Cisco Catalyst 4500E Series 10 Gigabit Ethernet Fiber Line Cards

The Cisco Catalyst 4500E Series supports 10 Gigabit Ethernet Fiber line cards.

The Cisco Catalyst 4500 12-port E-Series 10 Gigabit Ethernet line card (2.5:1 oversubscribed) can be deployed for high-performance and high-density 10 Gigabit Ethernet aggregation in the campus and in small to medium-sized networks as a core switch. The Cisco Catalyst 4500E Series 12-port 10 Gigabit Ethernet line card supports standard Small Form-Factor Pluggable Plus (SFP+) optics. The ports can be used interchangeably as Gigabit Ethernet and 10 Gigabit Ethernet to support phased migration from Gigabit Ethernet to 10 Gigabit Ethernet.

The Cisco Catalyst 4500E Series 6-port 10 Gigabit Ethernet line card (2.5:1 oversubscribed) can be deployed for high-performance/low-density 10 Gigabit Ethernet aggregation in the campus, in small to medium-sized networks as a core switch, or for high-performance wiring closets where additional 10 Gigabit Ethernet uplinks are required. The Cisco Catalyst 4500E Series 6-port 10 Gigabit Ethernet line card supports standard X2 optics as well as the Cisco TwinGig modules. The Cisco TwinGig Converter Module converts a single 10 Gigabit Ethernet X2 interface into two Gigabit Ethernet port slots, which can be populated with appropriate SFP optics, providing a total of 12 wire-speed Gigabit Ethernet ports if used in all six X2 interface slots. The flexibility provided by the TwinGig Converter Module enables customers to aggregate Gigabit Ethernet and 10 Gigabit Ethernet LAN access switches on a single line card and also supports phased migration from Gigabit Ethernet to 10 Gigabit Ethernet. This capability further demonstrates the flexibility and the investment protection of the Cisco Catalyst 4500 Series architecture (Figure 1).

TwinGig modules convert a single X2 port into two Gigabit Ethernet SFP ports.

Cisco Catalyst 4500E Series Gigabit Ethernet Fiber Line Cards

The Cisco Catalyst 4500E Series 24-port Gigabit Ethernet fiber line card (SFP based) and Cisco Catalyst 4500E Series 12-port Gigabit Ethernet fiber line card (SFP based) provide high-performance switching at 24 Gbps per slot (line rate). Both E-Series line cards are nonblocking and designed for high-performance 1 Gigabit Ethernet aggregation in the campus and to support Fiber to the Desktop (FTTD) applications.

Cisco Catalyst 4500 Classic Fast Ethernet Fiber Line Cards

The Cisco Catalyst 4500 Series offers a variety of classic Fast Ethernet line cards with fiber interfaces optimized for desktops, branch office backbones, and servers for enterprise and commercial switching solutions and service provider metropolitan Ethernet networks. Fast Ethernet line cards include various densities of wire-speed 10/100, 100-FX, 100BASE-LX10, and 100BASE-BX-D options.

Features and Benefits

Functional Transparency
Cisco Catalyst 4500 Series Switches offers an extensive line of modules that support numerous speeds and physical media combinations. These line cards are functionally transparent; all the packet processing, queuing, buffering, and QoS occur in the supervisor engine. To that end, both classic and E-Series line cards acquire the features and capabilities of the installed supervisor engine. For example, a classic line card previously deployed with a classic supervisor engine using 4 queues per port will automatically have capability for 8 queues per port if redeployed with a Supervisor Engine 7-E/6-E. This architecture enables customers to easily upgrade all Ethernet line cards on their Cisco Catalyst 4500 Series systems to higher layer switching functions by adding a new supervisor engine. The simple design of the line cards results in a very high mean time between failures (MTBF), helping ensure high availability for a single connection to an end user

Modular Versatility
The Cisco Catalyst 4500 Series is a centralized architecture that is designed to provide dedicated wire-speed bandwidth to each line-card slot within the chassis. Each line card has a dedicated bandwidth to the supervisor engine for packet processing. All network data that flows into the Cisco Catalyst 4500 Series through the various line cards goes through the supervisor engine for processing, even in single-slot port-to-port communications. All line cards have some per-slot bandwidth that allows network administrators to design a system that offers full dedicated bandwidth-to-server and switch-to-switch applications and still provides high performance over subscribed gigabit to the desktop.
A modular centralized design allows customers to use their investment in high-performance line cards across the entire line of Cisco Catalyst 4500 Series chassis and supervisor engines. For example, line cards that shipped with the original Cisco Catalyst 4003 Switch in 1999 will work in the Cisco Catalyst 4500E Series chassis. Because of the centralized architecture of the Cisco Catalyst 4500, all line cards deployed in a chassis benefit from the enhanced features the supervisor engine provides, including QoS, Layer 2/3/4 routing, and hardware-based IPv6.


Cisco Catalyst 4500E Series 10/100/1000 Line Cards


WS-X4648-RJ45V+E:
• 24 gigabits per-slot capacity
• 48 ports
• 10/100/1000 module (RJ-45)
• Cisco IOS Software Release 12.2(40)SG or later
• IEEE 802.3af/at and Cisco prestandard PoE, IEEE 802.3x flow control
• Bandwidth is allocated across eight 6-port groups, providing 3 Gbps per port group (2:1)
• L2-4 Jumbo Frame support (up to 9216 bytes)
• Capable of up to 30W of inline power per port on up to 24 ports simultaneously
• Enterprise and commercial: designed to power next-generation IP phones, wireless base stations, video cameras, and other PoE devices
• Campus and branch applications requiring enhanced performance for large file transfers and network backups

Specifications

Feature

Description

Standards

• Gigabit Ethernet: IEEE 802.3z, IEEE 802.3x, IEEE 802.3ab, IEEE 803.3at, IEEE 802.3af
• 1000BASE-X (GBIC), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, CWDM

EtherChannel technology

• Gigabit EtherChannel: All 1000 Mbps ports
• 10 Gigabit EtherChannel: All 10Gbps ports
• IEEE 802.3ad (Link Aggregation Control Protocol): All 1000 Mbps ports
• Port Aggregation Protocol (PagP): Yes
• Number of ports per tuple: 8
• EtherChannel and IEEE 802.3ad technology across line cards: Yes

Physical dimensions

• Occupies one slot in the Cisco Catalyst 4500 Series platform
• Dimensions (H x W x D): 1.2 x 14.25 x 10.75 in. (3.0 x 36.2 x 27.3 cm)

Environmental conditions

• Operating temperature: 32° to 104°F (0° to 40°C)
• Storage temperature: -40° to 167°F (-40° to 75°C)
• Relative humidity: 10 to 90%, noncondensing
• Operating altitude: -60 to 4000m

Safety conditions

Fiber optic lasers: Class 1 laser products

Safety certifications

• UL 1950
• EN 60950
• CSA-C22.2 no 950
• IEC 950

Electromagnetic emissions certifications

• FCC 15J Class A
• VCCI Class A
• CE Marking
• EN 55022 Class A
• EN 55024 Class A
• CISPR 22 Class A
• AS/NZ 3548
• NEBS Level 3 (GR-1089-CORE, GR-63-CORE)
• ETSI ETS-300386-2

ROHS Compliance

ROHS5

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.